Assembly Instructions for Autonomous Desk

Loosen Frame Screws

Loosen 4 screws (H) of the frame (P) with a 3mm Allen wrench (A).

Attach Leg to Frame

Use 8 screws (C) to attach the leg (I) to the frame (P), leaving a 2-5mm gap.

Attach Side Panel

Attach the side panel (M) to the frame (P) with screws (C).

Attach Foot to Leg

Use M6 x 35mm screws (D) to attach the foot (Q) and leg (I).

Attach Frame to Desk Top

Use ST5 x 16mm screws (E1) to attach the whole frame to the desk top (L).

Connect Power Cord

Connect the power cord to the outlet.

Reset Control Box

Press and hold the down button until the desk top is in the lowest position, then release the button and press the down button again for 5 seconds. When the keypad screen displays 'RST', release the button and press and hold the down button until the keypad screen displays the number.